HOW TO MAKE WOODTURNING EASIER
THURSDAY, DECEMBER 6, 2018
1. Lathe height—The height of the lathe should be set so that center of the spindle should be near the height of your bent elbow. 2. Where and how do you stand—stand with your feet approximately...
JET WET GRINDER WITH THE VERTICAL SOLUTION PRO SHARP 4X
SUNDAY, MAY 31, 2015
Adapting a Jet Wet Grinder to use the Vertical Solution Pro Sharp 4X The Jet Wet Grinder provides an edge that is unsurpassed for turning tools. The wet grinder has a major drawback that is also a...